Broken Deadlocked Vise - Perfect Restoration (I did it again)

  • Publicado el Hace un año

    my mechanicsmy mechanics

    I bought this vise pretty much 1.5 years ago together with the other Gressel bench vise I already restored and made a video. I also payed $20 for this one. Since then it was laying aroung in my basement. I always knew that I'll restore this one as well, just because it's a Gressel and it will totally worth to safe it from the trash.
    This one wasn't that rusty like the other one, but it was also completely deadlocked. The handle was beaten up and bent. The jaws, some screws and two pieces to hold the spindle were missing. The pin that secures the spindle from turning was broken. Because of all that the spindle fell out. This vise has two threads and two concentric bushings to keep the jaws in place. Talking to Gressel I found out that this method was only produced until 1960, so it's at least 60 years old now. It could be from 1943, as both parts had a „43“ stamped on them. As these original jaws are getting no longer produced, I decided to drill an extra hole between the threads to be able to use new jaws. Gressel was so nice to send me new flat jaws. All the bare surfaces were in really bad condition due to heavy use, that's why I decided to weld up material and clean all these surfaces on the milling machine. I replaced the handle with a new one, but I used the old rounded ends again which turned out great. I later secured the ends with Loctite when reassembling. I also made the two missing screws and the broken pin out of the old handle. I choose to paint the whole vise the same color as the movable jaws from the new Gressel vises are, cobalt blue (RAL5013). I think it turned out very well, the white lettering, the shiny bare spots and the black parts match very well.

    I hope you like my work and the video.

    Huge thank you to all of my Patreon and PayPal supporters and specially to:

    Adel AlSaffar
    afreeflyingsoul
    David Barker
    Gregory
    Muzaffer Aksoy
    Vince Valenti
    Yale Baker
    Alan Hanson
    alex latzko
    Amanda Taylor, Esq
    Andreas Mimra
    Andreswara Hermawan
    Andrew Phillips
    Anthony Adams
    Arni Bjorgvinsson
    audi4444player
    Courtney Maleport
    Cristian Zorilla
    Dan Williams
    Dre Gilley
    Harper Kim
    Hunter R.
    JD Smith
    Jessica Alexander
    Joel Miller
    Jonas Richartz
    LVE
    Marc Cercier
    Martin Rønnow Klarlund
    Mauricio Pacheco
    Mellissa Marcus
    Mellissa McConnell
    Nick Cannon
    Paul Ambry
    Paul Mampilly
    Risky Deem
    Robert Everich
    Shikidixi
    Trevor Kam
    TRG Restoration
    웅록 윤


    Timestamps:

    00:00 preview
    00:44 disassembling
    02:45 showing all the parts
    02:53 cleaning the parts with the parts washer
    03:11 removing the old bushings
    04:24 sandblasting
    05:17 restoring the fix jaw
    07:57 restoring the movable jaw
    09:45 restoring the ends of the handle
    10:37 making a new handle on the lathe
    11:48 restoring the spindle nut
    13:15 restoring the spindle nut holder plate
    14:05 making two new screws for the plate on the lathe and milling machine
    15:27 restoring the spindle
    16:21 making a new pin for the spindle on the lathe
    17:04 making the missing parts for the spindle on the lathe and milling machine
    18:12 applying filler
    18:52 painting
    19:41 showing the new jaws
    19:54 showing the new hardened pins
    19:57 showing all parts before reassembling
    20:09 reassembling
    22:26 showing the finished restoration
    23:22 final test
    23:49 Patreon supporters


    Time and costs of this restoration:

    I was working on this project for 2 weeks
    $20 vise
    $20 2k primer
    $30 2k coat cobalt blue (RAL5013)
    $30 steel for new parts


    My camera:
    Panasonic HC-V180


    If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

    Sorry for my bad english, it's not my language. I try my best to improve my technical english.

    Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.

    Thank you for watching :-)


    „I make a new one“ T-Shirts:
    teespring.com/stores/my-mechanics

    My Main Channel:
    www.youtube.com/c/mymechanics

    My Second Channel:
    eslimo.info/border/4EQ...

    My Patreon Page:
    www.patreon.com/mymechanics

    Follow me on Instagram:
    my_mechanics

    My Facebook Page:
    My-mechanics...

mamfzf
mamfzf

So awesome to see this (different kind) of vice restoration. We, as viewers, get to compare your increase in skill and experience- though I consider you to be the top machinist/restorer on youtube during your first Gressel Video- and get "A NEW ONE!" at the same time (new video to watch that is)! I must also commend your use of every possible original part of this vice as you could, even if some were refurbished for different components of the vice. I wonder if this Vice, since we're thinking it's possible it was made in 1943 based on stamps if it would be considered a "Low-background steel" item- at which point it may be worth its weight in gold for most governments (too bad for them; it's a Gressel Vice and we got to see it restored!) To all the other viewers out there- Seriously consider becoming a Patreon Supporter for my mechanics; in the video it's hinted at "exclusive content" and let me tell you it is WORTH IT! 1) Don't feel bad about that ad blocker; you're supporting my mechanics directly, and 2) Extras; EXTRAS!

Hace un año
Restaurando Coisas Velhas
Restaurando Coisas Velhas

Thank you friend. Excellent video. I'm already your subscriber.

Hace 26 días
Rifky Novaldi
Rifky Novaldi

@Reg Ion 1

Hace 2 meses
Rifky Novaldi
Rifky Novaldi

Hglptlh

Hace 2 meses
houari allali
houari allali

Kk

Hace 3 meses
Bruce K. Evans - Historian
Bruce K. Evans - Historian

@roblox tutorials I said you were ignorant.

Hace 6 meses
Diego Narro
Diego Narro

E ritornata nuova ma dove l'hai presa questa morsa

Hace un día
dimi evers
dimi evers

Yet another beautiful Gressel vise . You won't see good old fashioned quality like that anymore. Everything is made out of chinesium nowerdays. I wished I had a Gressel.

Hace un día
dimi evers
dimi evers

Hard wie Krupp Stahl

Hace un día
frank renda
frank renda

I think it’s better than new

Hace 2 días
JhinHo Kim
JhinHo Kim

Amazing !!!

Hace 2 días
MJorgy5
MJorgy5

Looks brand new, but better.

Hace 2 días
Shahid Malik
Shahid Malik

fantastic job.

Hace 5 días
my mechanics
my mechanics

Many thanks

Hace 3 días
Giovanni Pezzullo
Giovanni Pezzullo

E' fin troppo facile restaurare con decine di macchinari a disposizione . Questo video non ha nulla a che fare con il fai da te, per le persone comuni è assolutamente inutile!

Hace 6 días
Jerome Sincire
Jerome Sincire

C'est splendide, beaucoup de boulot mais pour un résultat miraculeux.

Hace 6 días
my mechanics
my mechanics

merci

Hace 6 días
Olivier Hecbard
Olivier Hecbard

Wahooo really a perfect work.

Hace 8 días
my mechanics
my mechanics

Thanks a lot 😊

Hace 8 días
Paycheck__
Paycheck__

That oilstone sounds haunts me 💀

Hace 8 días
my mechanics
my mechanics

Sorry to hear that

Hace 8 días
Иван Петров
Иван Петров

It’s so cool to see early restored equipment in action!)

Hace 12 días
my mechanics
my mechanics

Thank you :-)

Hace 10 días
Roney Costa
Roney Costa

at 9:23, what is this material you are using for sanding?

Hace 13 días
my mechanics
my mechanics

It's an oilstone

Hace 13 días
Busted Nutz
Busted Nutz

This came out very nice , I hope to achieve a similar finish with my latest purchase . Buster .

Hace 16 días
my mechanics
my mechanics

Good luck :-)

Hace 14 días
페어리
페어리

01:50 wow very rapid

Hace 19 días
my mechanics
my mechanics

yeah haha

Hace 18 días
Ринат Нургалиев
Ринат Нургалиев

Всё хорошо, смотрю с удовольствием. Но хватит уже сваркой сверкать на весь экран, смотреть неприятно, сам то в маске варишь.

Hace 19 días
Faith Den Elzen
Faith Den Elzen

Clever way to remove the bushings. Love that damaged parts are reused too BEAUTIFUL JOB AGAIN my mechanics love your work 👏

Hace 19 días
my mechanics
my mechanics

Thanks for watching, much appreciated

Hace 19 días
Ice Cold
Ice Cold

17:27 y'know, have you considered getting a tray that has your logo at the bottom? so when we have this angle we see your YT logo. Why? dunno, it would be cool. Like lockpinckinglawyer when he dissasembles locks he has a tray with his name engraved on it. It's a cool touch.

Hace 20 días
my mechanics
my mechanics

Glad you like it :-)

Hace 20 días
Ice Cold
Ice Cold

14:38 that was some really smooth editing you did there.

Hace 20 días
my mechanics
my mechanics

Nice to hear that, thanks :-)

Hace 20 días
Shawn N 4772
Shawn N 4772

1:55 ever try two impact guns? One in each hand Just admiring the patience you have I truly love these videos though

Hace 21 un día
my mechanics
my mechanics

Great idea!!

Hace 21 un día
Derek Comer
Derek Comer

Oh my goodness, this is now a thing of beauty, what a very talented man you are 🙏

Hace 26 días
my mechanics
my mechanics

Thanks, I'm glad you like it :-)

Hace 21 un día
Osman Cerik
Osman Cerik

Metali ışıl işlem yaptıktan SONRA siyahlanmasi için sarı sıvı ya batırıyorsunuz o sıvı nedir ustam

Hace 26 días
Сергей Степанов
Сергей Степанов

Хорошая работа !

Hace 26 días
my mechanics
my mechanics

Thank you

Hace 21 un día
Velga
Velga

Это столько работы для съемки!! Просто с ума сойти можно, если представить! Руки все время чистые, чтобы было эстетично. Инструменты, материалы, всё идеально чистое, аккуратное, рабочее место в идеальном порядке. Если бы делал без камеры, уверена, руки бы так без конца не мыл и все шло бы в миллионы раз быстрее. А тут еще надо камеру каждый раз менять, чтобы хорошие кадры снять. Ой, прям вообще. Какой молодец мужчина. Дай Бог здоровья всяческого и средств к существованию.

Hace 27 días
william brown
william brown

Just WOW! That is all I can say.

Hace 27 días
my mechanics
my mechanics

Many thanks for watching :-)

Hace 27 días
_ ambushplays
_ ambushplays

Amazing cant even recognize it

Hace 28 días
my mechanics
my mechanics

Thank you very much :-)

Hace 27 días
Thales Feitor
Thales Feitor

Wow! Way to go 💚💛👊🏻🇧🇷

Hace 29 días
my mechanics
my mechanics

Thanks, I'm glad you like it :-)

Hace 27 días
Ben Carver
Ben Carver

I always wonder what stories these old tools could tell if they could talk.

Hace un mes
my mechanics
my mechanics

Me too

Hace un mes
Roger Deane
Roger Deane

Now that's what I call a vise.

Hace un mes
my mechanics
my mechanics

Thank you

Hace un mes
Zenodotus Of Athens
Zenodotus Of Athens

Spending so much time restoring this is a vice

Hace un mes
my mechanics
my mechanics

Thanks for watching, much appreciated

Hace 29 días
Brian Cox
Brian Cox

What type of oil do you use to quench the heated parts?

Hace un mes
my mechanics
my mechanics

Here's a video I made about bluing: https://youtu.be/5Sty5upsadY

Hace 29 días
Isabel Donoso
Isabel Donoso

Wonderful work 👍🏻👍🏻👍🏻👍🏻👍🏻

Hace un mes
my mechanics
my mechanics

Glad you like it :-)

Hace 29 días
Ali Tosun
Ali Tosun

what are you doing after the restoration of all these tools and toys

Hace un mes
my mechanics
my mechanics

I keep them all

Hace 21 un día
Nicht Verfügbar
Nicht Verfügbar

I am glad you made this Video. This thing looked so badly damaged and you made a piece of art out of it... 👍

Hace un mes
my mechanics
my mechanics

Many thanks for watching :-)

Hace 20 días
Весёлый Ковач
Весёлый Ковач

Это, блять, не законно !!!

Hace un mes
ธงชัย สันติชีวิน
ธงชัย สันติชีวิน

Pengam long time Thailand

Hace un mes
Dan Tyler
Dan Tyler

Too nice to use!

Hace un mes
my mechanics
my mechanics

Many thanks

Hace 20 días
NOT ARAB IS TURK
NOT ARAB IS TURK

3:29 Be blind

Hace un mes
Pelin Akçakaya
Pelin Akçakaya

AAA""

Hace un mes
Bruce Parkinson
Bruce Parkinson

the only TRUE restoration channel on youtube.

Hace un mes
my mechanics
my mechanics

Thank you very much :-)

Hace 20 días
Wayne Pollard
Wayne Pollard

Nice painting booth ! Fine work !

Hace un mes
my mechanics
my mechanics

Thank you very much :-)

Hace 20 días
ZZZMDX
ZZZMDX

Золотой ты наш человек!

Hace un mes
John King
John King

Beautiful job !!

Hace un mes
my mechanics
my mechanics

Thanks :-)

Hace 20 días
Lucy's Silver Lining
Lucy's Silver Lining

Very accurate video title!!

Hace un mes
my mechanics
my mechanics

Thanks for watching, much appreciated

Hace 20 días
IanCass1979
IanCass1979

What is the filler used just before painting? Is it similar to Bondo?

Hace un mes
my mechanics
my mechanics

yes

Hace 20 días
Sam Khasam
Sam Khasam

Thé most Amazing thing is making a New one,,,,,

Hace un mes
my mechanics
my mechanics

Nice to hear that, thank you :-)

Hace 20 días
Sarah Krupa
Sarah Krupa

Is there a way you could give a quick warning before you spot weld? Like a blowtorch icon in the top righthand corner of the screen when you're about to weld, then a black screen a second before it starts so people have time to close their eyes if the welding light gives them a headache? It's hard to binge watch your channel when it hurts me, hahaha.

Hace un mes
my mechanics
my mechanics

I created a new filter for welding, check my firefighter axe video :-)

Hace 20 días
Your Face
Your Face

Just came here to say, would never, ever watch a ideo with such a douchey title

Hace un mes
Robert Brandywine
Robert Brandywine

How is it douchey?

Hace 20 días
Котик
Котик

Лучше чем порно! Это супер!!!

Hace un mes
5Cdarkwing
5Cdarkwing

Best restos on YouTube !

Hace un mes
Vijay Patil
Vijay Patil

use of puller to open jam vise was classic

Hace un mes
Michael Weaver
Michael Weaver

Freaking beautiful

Hace un mes
Boriss Wolf
Boriss Wolf

Everything is beautiful. One question remains - the expediency of the restoration. I mean, the cost of materials and the use of technology are significantly higher in price than the item being restored. Not economical!

Hace un mes
Robert Brandywine
Robert Brandywine

He makes money from his YouTube channel.

Hace 20 días
Ibrahim SM
Ibrahim SM

Very excellent... 👌🏽

Hace un mes
my mechanics
my mechanics

Thanks a lot 😊

Hace un mes
Hypersim
Hypersim

Great vid, again! One question: What is this Dremel you are using? Including the tip? Looks like a great replacement for a file!

Hace un mes
Reinholdt Heck
Reinholdt Heck

What’s the parts cleaning machine you have?

Hace un mes
Zetectic
Zetectic

You could say this is a gripping video 😃 Like the Cobalt blue colour: a job well done! Makes me wish I had a workshop to have one of these in but I'm no good at making things.

Hace un mes
my mechanics
my mechanics

Thanks! 👍

Hace un mes
David Washington, Contending for the faith
David Washington, Contending for the faith

I agree! Out of all of the numerous restoration videos I've seen, you are clearly and without a doubt the best! Tysytube is the 2nd best, and that's not a knock on his skills, it's a compliment because you have the bar set so high!👍🏾👍🏾👍🏾👍🏾👍🏾👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽

Hace un mes
my mechanics
my mechanics

Wow, thank you!

Hace un mes
Andrew Calvert
Andrew Calvert

Ah I’ll just make a new one,😎

Hace un mes
jsedu sjung
jsedu sjung

great mechanic and craftsman but, he makes way too many modifications to the pieces.

Hace un mes
ERDEM TEKİN
ERDEM TEKİN

Perfect restoration..

Hace un mes
Anil Singh
Anil Singh

Well done beautiful work

Hace un mes
Agustín S
Agustín S

Warning!!! Hello, through a comment I made on your channel I am receiving messages with sexual content. delete my comment or resolve this situation, thank you !!

Hace un mes
Eduardo Pecchio
Eduardo Pecchio

Adoro seus vídeos de restauração, são melhores e bem mais minuciosos que os outros restauradores a começar as próprias ferramentas que vc usa são impecáveis, como sou chato com meus instrumentos de trabalho e com os trabalhos que faço também sempre gosto da perfeição, dou os parabéns pra você e seu programa, continuem assim !!!!

Hace un mes
Aleisha Edwards
Aleisha Edwards

This looks better than new!

Hace 2 meses
Garage 66
Garage 66

Trabalho profissional, muito bacana!

Hace 2 meses
WuTangSpb
WuTangSpb

А какая смазка используется для шестеренок?

Hace 2 meses
Andrew O
Andrew O

Фанат фасок, одобряю

Hace 2 meses
Grumpy Grobby
Grumpy Grobby

Really gorgeous result! I love that you used the original shaft to make so many replacement parts. Well done, sir!

Hace 2 meses
my mechanics
my mechanics

Glad you like it

Hace 2 meses
LaurV
LaurV

4:28 wow! glad to see you repaired that green switch... :D (it was tickling my OCD so hard :D)

Hace 2 meses
my mechanics
my mechanics

Thanks :-)

Hace 2 meses
Nicas TheRock
Nicas TheRock

Na verdade isso é uma morsa.

Hace 2 meses
repeter555
repeter555

Is this for sale? I would like to buy it!

Hace 2 meses
Wrestle-Jitsu
Wrestle-Jitsu

The Dremel tool sounds exactly like my ex wife

Hace 2 meses
Антон Дедов
Антон Дедов

Perfect!!!!!!!!!!!!!!!!

Hace 2 meses
tango down
tango down

Stunner!!

Hace 2 meses
Иван Зотов
Иван Зотов

Красота.

Hace 2 meses
Jay S
Jay S

I'm glued to this and I don't even know what a deadlocked vise is 🤣

Hace 2 meses
Volkan Bollu
Volkan Bollu

The color is very beautiful.

Hace 2 meses
Felipe Campo
Felipe Campo

Great job sir.

Hace 2 meses
Noris ZilverBergen
Noris ZilverBergen

Each time, I'm telling myself: "... Too much time & effort to put for repairing the GARBAGES !!..." Each time, at the end, I say: "... Woow !! It's REALLY worth it !!..." Something is wrong in my head, I guess ... XDXDXD

Hace 2 meses
Adam Boozer
Adam Boozer

Those screws are massive. 😆 Looks like a damn rebar screw, but significantly larger than those in circumference.

Hace 2 meses
sachin singh
sachin singh

Awzm .... 👌👏

Hace 2 meses
Road Hog
Road Hog

Not a restoration if you modified it to use new hardware that it was not made with.

Hace 2 meses
Road Hog
Road Hog

@my mechanics uh yeah you did those two new holes

Hace 2 meses
my mechanics
my mechanics

But yeah, I did not modify it

Hace 2 meses
Abhinav Sharma
Abhinav Sharma

U r best

Hace 2 meses
piotr treder
piotr treder

Fajnie jest jak nie ma się takich maszyn, zrobić to wszystko bez nich, to jest wyczyn. 👍🏿

Hace 2 meses
NAC OK
NAC OK

YOU are a genius 😍😍😍

Hace 2 meses
Chris Pavlou
Chris Pavlou

could you send me this vice as a gift? I need a vice for my little home projects, but I am in a really tight financially situation, I can't even spare 35 euros for a cheap chinese one

Hace 2 meses
Jonas S
Jonas S

Hi, guy.... Excelent job!!... Congratulations from Brazil...

Hace 2 meses
my mechanics
my mechanics

Glad you like it :-)

Hace 2 meses
Ronjoe
Ronjoe

Chamfer all the things!

Hace 2 meses
Michał Misza
Michał Misza

Szukałem złota a trafiłem na diament 😍 Oglądam po kolei i nie mogę się napatrzeć. Szczególnie że lubię imadła. Bardzo satysfakcjonujące wideo 👌👏

Hace 2 meses
David Benefiel
David Benefiel

Have you ever considered using electrolysis to convert rust back to iron? That minimizes loss of material, and causes less pitting than sand blasting. It often also dissolves paint, especially if you use enough NaCO3 in the eltrolyte bath. Frozen parts often loosen after electrolysis.

Hace 2 meses
Robert Brandywine
Robert Brandywine

Or what about something like Evapo Rust, which I believe has a rust converter in it? But most people enjoy watching the sand blasting. He might have to sand blast anyone after doing that.

Hace 20 días
RUHİTANER
RUHİTANER

Wonderful...

Hace 2 meses
Mohamed Lyes Benyamina
Mohamed Lyes Benyamina

bravo je suis vraiment ému vous êtes un vrai artiste

Hace 2 meses
my mechanics
my mechanics

merci

Hace 2 meses
Nezih Aslan
Nezih Aslan

An amazing work. Congratulations

Hace 2 meses
Amit Derawala
Amit Derawala

So hard working with unique talent.

Hace 2 meses
Mhel Dapilos 🎥🎬
Mhel Dapilos 🎥🎬

Wow! Perfect 👍👍👍

Hace 2 meses
G.E. B.
G.E. B.

I have a similar vise. It looks ugly and rusty, but it works like a charm and I won't even attempt a restoration of it because I don't have your machinery. However, I did enjoy your skills and the beautiful result.

Hace 2 meses
Mista Monkee
Mista Monkee

Magnificent!

Hace 2 meses
FUCK SHIT
FUCK SHIT

magnifique travail comme d'habitude !!

Hace 2 meses
FUCK SHIT
FUCK SHIT

tu as fait quoi aujourd'hui , oh bin , j'ai frotté , frotté , frotté , frotté ...............................

Hace 2 meses

Siguiente

Tool Restoration - Electric Water Pump Rusty Old 12volt water Pump

10:11

RETO OPERACIONES COMBINADAS

0:18

RETO OPERACIONES COMBINADAS

Profe Jeff

Vistas 75 mil

Adopté un mandarino - Nathvidad día 1

13:15

Butter (Holiday Remix)

2:42

Butter (Holiday Remix)

BTS - Topic

Vistas 2 M

Extraño mucho a Mexico por esto

0:33

Extraño mucho a Mexico por esto

Chingu amiga

Vistas 2 M

Rusty Jammed Rebar Cutter - Restoration

24:03

Rusty Arbor Press - Restoration

21:19

Rusty Arbor Press - Restoration

my mechanics

Vistas 4 M

1918 Aircraft Rivet Hammer - Restoration

19:58

Old Soviet motorcycle full Restoration

34:59

Vise Drill Anvil [Restoration]

20:23

Vise Drill Anvil [Restoration]

Hand Tool Rescue

Vistas 628 mil

Antique Rusty Hand Plane - Restoration

22:02

1949 Wilton Antique Bullet Vise - Perfect Restoration

37:31

Old Rusty Virax Vise Restoration

25:37

Old Rusty Virax Vise Restoration

Steel Restoration

Vistas 2 mil

RETO OPERACIONES COMBINADAS

0:18

RETO OPERACIONES COMBINADAS

Profe Jeff

Vistas 75 mil

Adopté un mandarino - Nathvidad día 1

13:15

Butter (Holiday Remix)

2:42

Butter (Holiday Remix)

BTS - Topic

Vistas 2 M

Extraño mucho a Mexico por esto

0:33

Extraño mucho a Mexico por esto

Chingu amiga

Vistas 2 M

Los Tigres Del Norte - La Rutina

2:44

Los Tigres Del Norte - La Rutina

LosTigresNorteVEVO

Vistas 315 mil

¿Quién es el culpable ? #shorts

0:57